Bernards, NJ – 05/04/2014
Nothing remotely exciting, just more of the same…some moderate riding around the
Ravine Lake loop to sort out the R002 – SBK. The second test session gave me still a
bit more feedback and I was able to push a bit harder on the descents and tight corners, with slightly more confidence. I now have a good idea as to what changes I need to make
to the bike in order to dial it in a bit closer to my liking.
parked next to the 848 Evo..
The official rollout and shakedown run of the Black Blade R002 Supersport took place
on Wednesday, March 26th at Valley Park circuit. First ride, though short provided a
limited amount of feedback, but the 2014 machines chassis setup and geometry seem
decent enough to work with going forward. This was the first time that the bike had
turned it’s wheels in any significant way. As expected, there were the obligatory teething problems. Again, this was anticipated but that is what testing is all about.
My saddle, brake lever/hood settings were loosely based off of my previous bike, so
I knew that dialing these settings in would take a bit of time. First few pedal turns I could
tell that the saddle height was nearly perfect, but the fore/aft setting was a bit too close to the center of the bars. That perception was confirmed up once I measured my knee to the ball of my foot ratio with a plumb bob. So, after moving the saddle slightly rearward about 1mm from the center of the seatpost and aligning the brake hoods to my liking I put a few more miles on the bike.
The range of adjustments with the saddle fore and aft, saddle height, stem length
and rise, though limited will all play a significant part in getting the setup as close to correct as possible. While balancing the overall ‘fit’ and ‘feel’ of the machine. Initially, the steering feels twitchy, not sharper but ‘nervous’ and certainly not as comfortable as my previous Pro-Lite Galileo, which is extremely stable on high-speed descents. It will take some time to sort out this issue and get used to the feel of the R002 – SS chassis.
I am confident that I will be able to improve upon the inherent performance of the
R002 – SS and find a good compromise with the setup over the next few weeks.
Another longer test ride is planned for the following week.